loader HSW 530H is one of the most popular machines sold by Huta Stalowa Wola. Among the equipment to work on the handling of granular materials and brittle it średniak terms grade and tonnage capacity of the main unit. Family
HSW wheel loaders includes six models with engine capacities from 90 to 309 kW and standard bucket capacities from 1.34 to 11.50 cubic meters. Operating weight of Polish chargers range from 8.8 to 42.2 tons Construction Innovation
HSW 530H standard operating weight 16.485 kg six drives, diesel, turbocharged (with intercooler intake) Cummins engine CTAA 8.3-C with a capacity . 8.3 If pursuant to 195 hp (145 kW). Motor has 958 Nm of torque at 1,500 rpm. per minute. The unit meets the emission requirements EU Stage II and EPA Tier 2 Power is transferred through a four-level, electrically controlled Powershift transmissions, power shift.
www.ladowarki-teleskopowe.pl
HSW 530H uses the differential with increased internal friction. Forward speed is up to 37.3 km / h (fourth gear), backwards - 26.4 km / h (in third gear).
In relation to the previous generation of machines in this class in the charger, upgraded propulsion systems to reduce the noise level. Front axle is mounted rigidly to the machine frame, rear axle is mounted in self aligning (oscillation angle 24 degrees). The HSW 530H, traditional for this type of machinery, power is transmitted on four wheels. Height traveled cross-country inequality may be up to 436 mm. The machine is equipped with a hydraulic steering system of the articulated frame. Steering angle measuring 7.99 m (with standard bucket with the capacity. 2.8 cubic meters. In the operating position), the charger is 40 degrees, turning radius (measured on the outer side of tire) - 5.85 m. The position of the operator gained
Vibration isolation. Shields were used to protect the operator adjusted the machine to work in extremely harsh climatic conditions, such as tropic, severe frost and desert conditions.
Comfort and ergonomics
Presented telescopic loader was equipped with jednodźwigniowy (joystick) control system hardware working. This allows precise guiding the work of machines using fast (time to lift the boom 5.9 sec, leaving 4.2 seconds, 2.5 seconds discharge time) hydraulic operating system. Telescopic steering column and moving adaptation favors the steering wheel position to the position of the operator.
cabin is soundproof, heated, equipped with such air conditioning, anti-theft, lens hood. The seat has a cushioning, full control and safety belt. The controls for operating the machine and accessories are arranged according to ergonomic principles, which ensures comfort.
on request
HSW 530H, like other loaders Huta Stalowa Wola, among others can be additionally equipped protective in chains to the wheels, hydraulic quick coupler, media working attachments, weighing systems, driving stability, lubrication, and cover the windshield. To work in the quarries are used special tires and bucket rock to rock with the teeth and caps
conservation. On request the machine can be equipped with a package of Arctic, or to work in high temperatures, and to work on landfills filtering device is installed. Telescopic
can work in various construction equipment configurations: the high-lift boom, with standard buckets for general use (with a straight bar or an angle), zrywakowymi, żaroodpornymi, high dump or landing, with teeth welded or bolted to the spillage cleaning, stone, coal , loose materials, agricultural products, to dig. Among the additional hardware You can also find such log grapple or compost, or pallet forks or to transport boulders.
0 comments:
Post a Comment