Images From Kate Playground

Sales and rental of telescopic handlers of new and used telescopic loader rental

sale and rental of telescopic handlers of new and used
- Poznan, Wroclaw, Katowice, Krakow, Poland -

Details: Tel: 692-281-677

Telehandler Manitou MHT

Almost 50 years experience in the production of Manitou lifts resulted in the creation of the MHT series machines, intended for very heavy work. Are equipped with a turbocharged engine and hydrostatic drive Mercedes (hydraulic pump with variable flow and the hydraulic motor with variable). Hydrostatic drive allows the operator to perform any work without having to change gears. Maximum load capacity machines can be MHT 16 000 kg and a maximum lifting height is up to 10 meters.

are perfect for work in lumber mills, mines, quarries, industry, ports and harbors.

Telehandler Manitou BUGGISCOPIC

Four Compact telehandlers BUGGISCOPIC BT 420 and BT 425 with hydrostatic transmission, powered by Perkins diesel engine 50 hp.

maximum lifting height of 4.00 has a maximum load capacity is 2000 or 2500. BUGGISCOPIC series machines are used in confined spaces with limited room for maneuver area, where the use of a larger machine would be difficult or even impossible.

Telehandler Manitou MLA

Telescopic MLA series - dedicated to applications in agriculture, have a pivot frame, PERKINS diesel engine power of 123 hp and a Powershift gearbox. Maximum load height is 5.11 maximum load capacity is 2500 or 2800 kg, depending on the model.

for aerial Manitou MLT

MANITOU MLT series is particularly keen to use the machine for use in agriculture. They are designed for continuous operation in harsh conditions. With almost 50 years MANITOU experience in manufacturing equipment for agriculture meant that "telehandlery" MANITOU machines are considered durable, reliable, created in order to meet the demands placed on them. They are characterized above all ease of use, high efficiency and productivity. Our specialists will be helpful in selecting an appropriate device MANITOU order to fully adapt to the specific work performed.

Tricycle telescopic handlers TWISCO

Compact with telescopic arm of the machine will save you time when working in confined spaces (Garages, basements, greenhouses). Twisco is very handy and easy to transport machine. Can be transported on a normal trailer. It is characterized by a very small turning circle (2.22 m) and very good operating parameters (range upward 4.0 m, 2.13 m in front). Drive on all three wheels can move freely in the rough terrain. It is also possible to adapt a wide range of additional equipment (fork, spoon, spoon 4in1, with grapple bucket, drill, sweeper, etc.)

Rotary Charger MRT handlers

In 1993, the series' telehandlerów "Manitou telescopic aerial joined the rotation. In this way the handlers has confirmed its position as world leader in off-road machines for the amount of feed material. Rotary telescopic type of MRT is a combination of three machines:

• telescopic crane
• platform for work at heights

MRT series was constructed using the best components:

• Rexroth Hydrostatic
Hydraulic Manifolds
• Danfos
• Gear turrets Rotherd
• reducer Trasmital
• Hurth Axles

- MANITOU MRT Series M Series are powered by Perkins engines of 101 hp. Depending on the type of machine (MRT 1432, MRT 1542 MRT 1635 MRT 1742) maximum administration charge is between 14 and 17 has a maximum load capacity ranging from 3200 to 4200 kg.

- MANITOU MRT PRIVILEGE series are powered by Mercedes engines with 150 hp and 216 hp. Depending on the type of machine (MRT1850, MRT2150, MRT2540, MRT3050) maximum administration charge is between 18 and 30 has a maximum load capacity is 4999 kg.

Telescopic Manitou MANITOU

is primarily a global leader in the manufacture of machines dedicated to construction. Its success is earned over decades from the supplier of machinery with sustainable, sound and "refined" structure.

Chargers teleskopopowe MT series of rigid frame to raise loads to a height of 5 to 18 meters. Telescopic MANITOU machines are ideal for all poszujkujących universal hardware.
From October 2007 MANITOU offers a series of telescopic handlers PRIVILEGE, which improved version of the machine podnoczących cargo and workers at the height of 14 and 18 meters. This is the latest proposal MANITOU.

Telescopic Manitou MVT

Almost 50 years of experience Manitou in the production of telescopic material handlers, resulted in the creation of machines MVT series, intended for very heavy work.

are equipped with a turbocharged Perkins and hydrostatic (hydraulic pump with variable flow and the hydraulic motor with variable). Hydrostatic allows the operator to perform any work without having to change gears are perfect for work in lumber mills, mines, quarries, industry, ports and harbors.

EXCAVATOR AND LOADER Manihoe MANITOU

In 2005 MANITOU started manufacturing backhoe loaders Manihoe. This machine is a successful application of the telescopic arm in a backhoe-charger. This is according to the concept MANITOU " Charger telescopic arm equipped koparkowe. " Kinship can be seen at first glance. Just as in the telescopic loaders, the engine is placed to the side, left side, while the tanks are located on the right side. Consequently, forward visibility is excellent because it is not obscured by the engine cover. Thanks to this movement of the wheels is not limited by the engine block as in the classical backhoe loaders and the outer turning radius of only 4.87 m. The telescopic arm double fall configuration is capable of carry the weight of 2.2 tons (2.5 t up to the level of 4.5 m) at the height of 5.22 m. The load This is immutable and does not depend on the amount of raising the arm or from its reach: the same weight increases the device at a height of 1 m and 5 m, or at maximum forward reach of 3 m. These parameters can be tracked through the shoulder, back umieszczonemu and fulfills the role of counterweight. In the cab so the operator is not required load controller, or lock the hydraulic system, which greatly facilitates maneuverability and handling. Standard trench depth with this unit is 4.98 m, height excavator arm: 4.60 m, the range of 5.90 to the arm angle closing Bucket: 204 º. There is also a telescopic arm to pull, which is able to dig deeper, but in this case with a smaller force. For the sake of simplicity, the only available system of levers to control (no possibility of joystic'ka). Standard system is mounted on the front (also available as an option on the back), which provides, inter alia, the use of all accessories available with conventional telescopic loaders. 100-hp engine TURBO PERKINS, drive into 4 equal wheel, 4 wheel steer, mechanical transmission with electro-hydraulic switch direction and the two basic parameters: the load 2.2 t, 5.2 m height, make the machine Manihoe unrivaled in the market generally available backhoe loaders.

Efficient wheel loaders and telescopic

Loaders, Telescopic January 27th, 2009

Many companies based on high technology and experience offers clients modern loaders, such as wheel loaders and telescopic handlers. In fact, it's all about one thing - digging and moving materials as cheaply as possible and as quickly as possible, with minimal impact on the operator, machine and environment natural. charger many companies have enjoyed an excellent reputation for its high performance and low fuel consumption. These features make the user can perform more work, and his business would generate greater profits. Many construction machinery manufacturers are leaders in the production of wheel loaders and telehandlers. Most manufacturers in the production outpaces increasing number of new chargers that are even more efficient and more friendly for the operators. Customer satisfaction can also arise from the knowledge that loaders or telescopic handlers can be used in any use and the most difficult situations, where it is necessary to use such an excavator. This modern charger, designed and built based on feedback obtained directly from users chargers are popular throughout the world. High performance wheel loaders and telescopic handlers have everything you could ever expect from this type of construction machinery, namely durability, simplicity, power, performance, comfort and ease of operating and maintenance, which ensures long life equipment rental

charger

Chargers, Chargers Telescopic January 26th, 2009

charger on the market today are one of the dominant groups of construction machinery, mainly due to its use, and special design. The development of such devices leads to an increase in their productivity, which enables you to extend the possibilities of using the charger. Many companies are relying on high technology and experience provides customers with a modern wheel loaders and telescopic handlers. Many companies such as Atlas, Bobcat, Case, JCB, Doosan, Caterpillar, Komatsu, Manitou, Terex, New Holland, for years performed throughout the country service, repair and sale of various kinds construction machinery. In addition to these services, some companies are leading hire loaders and other construction machinery. keep rent and hire for any duration, depending on the nature and needs of the customer who rents the equipment. Chargers different types, namely, wheel loaders and telescopic handlers have greatly facilitated the work of man. That is why we care about this type of equipment. Failure to follow manufacturer's recommendations usually leads to faster wear of machine parts, regardless of the type and brand.